HS1T Heavy Duty Locking
Key Features:
Locking force of more than 5000N (40mm-wide slim model)
The head can be rotated to allow the actuator entry direction to be changed easily
• Head rotating structure. Can be roated without removing the head.
• Prevents invalid operation. (On usual interlock switches, the NC contact closes when the head is removed)
Lock status can be identified from the front – Rear unlock mechanical indicator (First in the industry) (*1)
Mechanical indicator function allows the lock status to be easily identified from the front while the rear unlock mechanical indicator is pressed.
Note: Interlock switches with rear unlock mechanical indicator function only.
*1) Based on IDEC research (as of March, 2019).
New Angle adjustable actuator (vertical/horizontal)
New angle adjustable actuators available with retention force of 5000N.
Strength enforced with a metal cover.
Rear and side mount possible.
Energy efficient 200mA solenoid consumption
Because the solenoid current for locking operation is 200mA, the solenoid can be activated without using a relay.
Rear unlocking button
Door lock can be unlocked inside the barrier by a worker left inside a hazardous area.
Spring clamp terminals
Spring clamp terminals offer excellent vibration resistance, preventing wires from loosening. No need for additional tightening.
Side-conduit model
Cables can be connected to the right, left, or bottom (for straight cable orientation) of the terminal cover.
Long marking tubes can be used on the wiring cables.