Série LF3D éclairage à LED
Excellent optical performance and robust construction suitable for use in machine tools
Caractéristiques principales:
Eliminates the multi-shadow effect
Reduced multi-shadow effect enables easy visual inspection of the machined surface. [Patent pending (LF3D)]
Reduces reflection from light source
LED light source reflects on the workpiece and stripes appear.
The LF3D LED allows the light to be evenly distributed
to provide natural lighting, and enables visual inspection.[Patent pending (LF3D)]
Uniform lighting provides uniform illumination inside the work area
By combining our optical design technology gained by development of LED lighting & sensors
and by optimum LED alignment, the brightness contrast difference is improved by 85%.
Select from standard or diffused light distribution depending on the machine tool needs
Equipped with glare mode to prevent operators from glare during maintenance [Patent pending (LF3D)]
Modes can be changed by just the wiring. Complicated settings such as PWM and dedicated controllers are not required.
Rugged construction and environmentally resistant
Suitable for use in machine tools
Degree of protection IP67G / IP69K
Oil-resistant gasket and unique structural design achieves IP67G protection degree. (*1)
Withstands exposure to water and oil. (*2)
IP69K for use in high-pressure, high-temperature washdown.
*1) IP67F (LF1D)
*2) Oil used for testing: Insoluble oil JIS N3-8
Robust material
Reinforced glass, stainless steel, zinc diecast, extruded aluminum prevents damage from scraps
Resistant to high temperature
Wide operating temperature range (up to 55℃).
Improved design and user-friendly
Compact, slim, and light compared to conventional products
Easy replacement with conventional products
Panel cut-out for older LED lighting will fit the new LF3D LED.
Accessories for surface mount type replacements available.
Wide variety of connector types available
Wide selection of models to suit a various machine tools
Effective solution for machine tools
LED lighting inside machine tool allows for clear identification of chatter marks
BEFORE
Hard to see chatter marks
Glares from LED lighting inside the machine tool could be mistaken as chatter marks while visually checking the machine operation. This often caused chatter marks to be left untreated, delaying maintenance and worsening the situation.
AFTER
LED lighting improves machining efficiency
IDEC's unique optical technology enables the light to shine evenly on the surface, suppressing multiple shadows and allowing the operator to
see scratches and unevenness on the workpiece. LF3D lighting makes it possible to check whether chatter marks have been generated or not easily, at a glance.